To Use Desktop Computer with Plasma screen
- Turn on the computer located in the white cabinet below plasma screen.
- There is a wireless keyboard and mouse available to use from any location in the room. Make sure the corresponding USB receiver is inserted in the computer port and both devices are turned on. If the wireless keyboard is still not functioning, please call 5700 to report the problem.
- To display computer image on plasma screen, use the Control Panel located in the white cabinet.
- Press Display On button.
- Press PC button.
- Computer image should appear on screen.
- You may adjust the aspect ratio of the image by pressing the Aspect button on the control panel.
- Adjust volume, if needed, with volume knob on control panel.
- When finished, log off computer, then press the Display Off button for 3 seconds.
To Use Laptop with Plasma screen
- There is a black ring attached to an HDMI cable with three adaptors: Mini-DisplayPort, Full sized DisplayPort, and USB-C.
- Select the HDMI adaptor that fits your device. Plug laptop cable into laptop's external monitor jack.
- Turn on laptop.
- To display laptop image on plasma screen, use the Control Panel inside white cabinet.
- Press Display On button.
- Press HDMI button.
- Laptop image should appear on screen. If it does not, try pressing another button and then repressing the HDMI button.
- You may adjust the aspect ratio of the image by pressing the Aspect button on the control panel.
- When finished, turn off and unplug laptop, then press the Display Off button for 3 seconds.
To Use the BluRay DVD Player
- Turn on BluRay player. (FYI, this unit plays both standard and BluRay DVDs and is multi-region.) Insert DVD.
- To display DVD image on plasma screen, use Control Panel in white cabinet.
- Press Display On button.
- Press the DVD button on Control Panel input selector.
- You may adjust the aspect ratio of the image by pressing the Aspect button on the control panel.
- To operate DVD player using control buttons on control panel, ensure that the yellow light next to DVD is lit. The provided BluRay remote control can also be used.
- Adjust volume using knob on Control Panel.
- When finished, press the Display OFF button, holding it at least 2 seconds until it starts blinking. Eject DVD and turn off DVD player.